Network Access & Telecommunications Equipment - RAD Data Communications
search:

  GO
Products
FOMi-E1/T1

E1/T1 Fiber Optic Modem with Remote Control

FOMi-E1, FOMi-T1: E1/T1 Fiber Optic Modem with Remote Control
 

Product Summary

RAD's FOMi-E1/T1 fiber optic modem with remote control converts E1/T1 signals into optical signal, and then transmits the converted signal over a fiber optic cable for extended distances up to 100 kilometers (62 miles). The FOMi-E1/T1 fiber optic modem with remote control supports different fiber optic interfaces and can operate with several grades of fiber optic cable. The local and remote units are monitored and controlled via an in-band channel. The FOMi-E1/T1 fiber optic modem with remote control is available as a standalone, or as a single or dual modem card that can be installed in the LRS-24.

Benefits

• Extends the range of equipment with electrical E1 or T1 interfaces over fiber optic (up to 100 kilometers (62 miles))

• In-band management of both local and remote units saves fiber

• Laser diode option for extended range

Quick Specs
 Transparent to framing (ITU G.704)
 Supports balanced and unbalanced interfaces
 Conforms to all relevant ITU standards, including V.54 loopback diagnostic testing and V.52 BER testing
 Diagnostics and alarms include V.54 loop back tests, BER testing, and dry contact alarms
 Available as a standalone, single modem card, or dual modem card suitable to be installed in the LRS-24 chassis
For more information, download the Data Sheet

Further Product Information

 

Extends range of E1/T1 equipment

The FOMi-E1/T1 fiber optic modem with remote control extends the limited range of the electrical interface of E1 or T1 equipment over fiber optic links. Range extension is provided for the following interfaces:

- 100 ohms balanced T1 at 1.544 Mbps

- 120 ohms balanced E1 at 2.048 Mbps

- 75 ohms unbalanced E1 at 2.048 Mbps

 

The modem is transparent to ITU G.704 framed signals.

 

An in-band management channel enables monitoring and control of local and remote units. The management channel is transmitted over the same fiber optic link used for data transfer, with no interference between them.

 

The FOMi-E1/T1 is available as a standalone unit with a front panel LCD, or with a blank panel and a portable control unit (PCU) to prevent unauthorized operation. A card version of the FOMi-E1/T1 is available for the LRS-24 19" rack with central SNMP management. A double modem card is also available for the LRS-24, which supports up to 24 modems in a 4U/6U-high chassis.

 

Two BNC coax connectors and an RJ-45 connector are used for connection to coax or twisted pair cables. An additional DB-9 connector is used for external dry contact relay activation in case of major or minor alarms.

WANT MORE INFORMATION?
Related Links
 Data Sheet
FOMi-E1/T1
 Compare this Product
FOM, FOMi

FOMi-E1, FOMi-T1: E1/T1 Fiber Optic Modem with Remote Control
 
 Products    Solutions    About RAD UK    News & Events    InfoCenter    Where to Buy