Full-duplex operation is achieved using the adaptive echo cancellation technique. This method entails setting one modem as a master and the other as a slave (switchselectable). 2B1Q line coding provides an operating range of up to 8 km (5 miles) for all data rates, with an internal rate converter that converts all DTE data rates to a line data rate of 128 kbps.
Local and remote loopbacks can be activated from either side of the line, to test both modems and the line. Loopbacks are controlled by a manual switch or from the DTE interface. The modem includes a BER tester for complete end-to-end integrity testing. An error LED indicates each bit error detected. The ASM-31 has line protection circuits against lightning and power surges.
Interface options include V.24/RS-232, V.35, V.36, X.21, RS-530, built-in Ethernet bridge, router and G.703 codirectional 64 kbps. The analog line connectors are RJ-45 and terminal block.
The ASM-31 is available as a standalone unit or as a card for the 19" ASM-MN-214 rack that holds up to 14 cards.